Budget-Friendly Plumbing Upgrades

It doesn’t have to cost a lot to improve your home’s plumbing system. With a few well-thought-out changes, you can make your plumbing work better, use less water, and save money on utilities. Here’s a look at our favorite plumbing upgrades that won’t burden your household budget.

1. Install Low-Flow Showerheads

By using low-flow showerheads, you use lower amounts of water with similar pressure. These units can cut your shower water use up to 50 percent.

2. Upgrade to Dual-Flush Toilets

Toilets are one of the most water-intensive fixtures in any house, making them ideal candidates for improvement. Dual-flush toilets give you the option of full or partial flush, allowing you to save water based on the demands of each use. This allows you to save money on your water bill while also contributing to environmental conservation.

3. Replace Faucet Aerators

Faucet aerators are tiny, inexpensive devices that screw into the tip of a faucet to restrict the flow of water. These devices expertly blend air and water, making sure that you get great water pressure while decreasing water use. They come in a variety of flow rates, letting you select the one that best meets your needs.

4. Insulate Pipes

Insulating your hot water pipes can do a lot to increase home plumbing efficiency. By insulating your pipes, you can minimize heat loss while waiting for the tap to deliver hot water. Moreover, the use of insulated pipes may also be effective in lowering the risk of freezing pipes during colder months.

5. Install a Water Heater

If you have an electric water heater, consider adding a water heater timer to your home. This device allows you to schedule the times your water heater runs, cutting down on runtime during low-demand hours.

6. Consider a Tankless Water Heater

If you need to upgrade your water heater, switching over to a tankless unit might be an economical option. While tankless water heaters cost more than your normal storage tank units, they may be more efficient in the long run. Tankless water heaters use heat exchangers to provide hot water on demand, which saves energy when compared with traditional storage tank-type units that store and reheat the same 100 to 200 gallons of water all day.

7. Swap Out Old Fixtures

Old faucets, showerheads, and other fixtures may be using more water than is required. You may enhance the plumbing efficiency of your house without breaking the bank by replacing obsolete fixtures with newer, more water-efficient versions. Installing new shower fixtures is also a quick, budget-friendly way to make bathing more enjoyable. Upgrading fixtures may also improve the aesthetics of your house, giving it a more modern appearance while increasing efficiency.

8. Add Leak Detection

Minor drips put dozens of gallons down the drain, increasing your monthly utility costs. Leak detection systems are an inexpensive method to detect leaks early and prevent them from becoming a huge problem. Some systems will power down your water source as soon as they identify leakage.

9. Install Pressure-Reducing Valve

High water pressure can stress your home’s plumbing, which can cause leaks, broken pipes, and fixtures and appliances that don’t last as long as they should. You can utilize a pressure-reducing valve (PRV) to reduce water pressure throughout the house. Not only does a PRV help keep your plumbing from breaking down by reducing excess pressure, but it also conserves water. Less pressure means there is a lesser volume of water running through the taps and fixtures.

10. Professional Drain Cleaning

Slow drains and jams can happen over time because of grease, hair, soap scum, and other buildups. A low-cost purchase that helps avoid big plumbing problems and keeps your pipes flowing easily is having your drains cleaned by a professional on a regular basis.

Contact Us Today

Making plumbing changes that don’t cost a lot of money is a smart way to make your home more energy efficient, lower monthly bills, and stop problems before they happen. There are a lot of inexpensive ways to improve your home’s plumbing system, such as showerheads that use less water, leak detection systems, and pressure-reducing valves. When you’re ready to add your own budget-friendly plumbing upgrades, contact ACW Service Inc. We can help you with all your plumbing needs including those relating to drains and sewers, gas lines, sewage, and other services.

Contact us today to schedule an appointment.